House Grail is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

8 Best Drill Bits for Porcelain Tile in 2024 – Reviews & Top Picks

Lined up drill bits

Lined up drill bits

Porcelain tile is attractive and inexpensive. It’s also quite durable and will likely last many years. However, putting a hole in it for pipes can be difficult because it cracks and shatters easily. So, if you are looking to make a hole in your tile but aren’t sure which drill bits are best, keep reading as we provide reviews of the top brands, along with the pros and cons of each so you can see the differences between them. There’s also a buyer’s guide of things to look for to help you make an informed purchase.

tool divider

A Quick Comparison of Our Winners of 2024

Rating Image Product Details
Best Overall
Winner
BOSCH HDG14 1/4 In. Diamond Hole Saw BOSCH HDG14 1/4 In. Diamond Hole Saw
  • Vacuum-brazed diamond grit
  • Segmented teeth
  • Quick-change adapter
  • Best Value
    Second place
    QWORK 5 Pcs Set QWORK 5 Pcs Set
  • U-groove
  • Anti-skid handle
  • Low cost
  • Premium Choice
    Third place
    Drilax Diamond Drill Bit Diamond Hole Saw Drilax Diamond Drill Bit Diamond Hole Saw
  • Several pieces
  • Smooth surface
  • Carrying case
  • NEIKO 00823A Diamond Hole Saw NEIKO 00823A Diamond Hole Saw
  • Electroplated diamond surface
  • Solid steel construction
  • Easy removal
  • Baban Diamond Drill Bits Baban Diamond Drill Bits
  • Several bits
  • High-speed steel
  • The 8 Best Drill Bits for Porcelain Tile

    1. BOSCH HDG14 1/4 In. Diamond Hole Saw — Best Overall

    BOSCH HDG14 1 4 In. Diamond Hole Saw

    Size: ¼ inch
    Number of pieces: 1

    The BOSCH HDG14 1/4 In. Diamond Hole Saw is our pick as the best overall drill bit for porcelain tile. It has a vacuum-brazed diamond grip tip, which helps it easily cut through porcelain tile, leaving a smooth hole. The segmented teeth help reduce debris and heat, increasing lifespan, and the bit even includes a quick-change adapter to help speed up the time that it takes to change bits.

    The only downside is that it can be slow to cut through the tile, requiring longer than more expensive brands.

    Pros
    • Vacuum-brazed diamond grit
    • Segmented teeth
    • Quick-change adapter
    Cons
    • Works slow

    2. QWORK 5 Pcs Set — Best Value

    QWORK 5 Pcs Set

    Size: 6mm—12mm
    Number of pieces: 5

    The QWORK 5 Pcs Set is our pick as the best drill bit for porcelain tile for the money. The pack comes with five bits, so you’re more likely to find the size that you need, and the U-groove helps remove dust while keeping the temperatures down. The anti-skid handle helps reduce slippage while working, for more efficient cutting action.

    The QWORK is a great value, but the carbide tips are not as long-lasting as diamond ones, so you won’t be able to make many holes before you need a replacement.

    Pros
    • U-groove
    • Anti-skid handle
    • Low cost
    Cons
    • Tungsten carbide tip
    • Short lifespan

    3. Drilax Diamond Drill Bit Diamond Hole Saw — Premium Choice

    Drilax Diamond Drill Bit Diamond Hole Saw

    Size: ¼ inch—2 inch
    Number of pieces: 10

    The Drilax Diamond Drill Bit Diamond Hole Saw is our premium choice. The pack comes with 10 bits and is more than suitable for most home jobs. The thick diamond coating creates holes with a smooth surface fairly quickly, and the bit has a long lifespan that can make several cuts in the tile before you need a new one. It also comes with a handy carrying case that will keep the bits in good shape while you store them.

    The only problem is that these bits are expensive and might be too many if you need only one or two holes.

    Pros
    • Several pieces
    • Smooth surface
    • Carrying case
    • Long lifespan
    Cons
    • Expensive

    4. NEIKO 00823A Diamond Hole Saw

    NEIKO 00823A Diamond Hole Saw

    Size: 5/32 inch—½ inch
    Number of pieces: 5

    The NEIKO 00823A Diamond Hole Saw is a multi-piece set with several bits to help you create a properly sized hole in your porcelain tile. The CNC machined tip is smooth and accurate, with an electroplated surface that won’t wear out. The bits are easy to remove and have a solid steel construction.

    The only downside is that cutting through the tile is a little slow.

    Pros
    • Electroplated diamond surface
    • Solid steel construction
    • Easy removal
    Cons
    • Slow

    5. Baban Diamond Drill Bits

    Baban Diamond Drill Bits

    Size: 5/32 inch—½ inch
    Number of pieces: 10

    Baban Diamond Drill Bits are great drill bits for any home workshop. They are made of high-speed steel to help keep temperatures down while increasing lifespan. Each bit has a high-quality diamond coating that helps produce a smooth cut through porcelain tile and many other hard materials.

    The downside to the Baban brand is that it doesn’t come with a carrying case to hold the bits when you aren’t using them. Also, the drill bits are slow to cut through tile.

    Pros
    • Several bits
    • High-speed steel
    Cons
    • Does not include case
    • Slow

    6. BLENDX Diamond Drill Bits

    BLENDX Diamond Drill Bits

    Size: 6mm—50mm
    Number of pieces: 10

    BLENDX Diamond Drill Bits are attractive chrome bits that will look great in any workshop. They are perfect for many surfaces, including porcelain tile. Its construction includes high-speed steel that helps keep temperatures down, and each bit is nickel plated to help prevent rust. The bits also have a thick diamond coating at the tip to help extend life.

    The downside to the BLENDX is that there’s no center bit to help you get started, and they wear out quite quickly after only a few holes.

    Pros
    • High-speed steel
    • Smooth cuts
    • Durable
    Cons
    • No center bit
    • Wear out quickly

    7. DEWALT Tile Drill Bit, Diamond Tip

    DEWALT Tile Drill Bit, Diamond Tip

    Size: ¼ inch
    Number of pieces: 1

    The DeWalt Tile Drill bit is a fantastic bit by a company known for making great tools. It has a reverse spiral thread that helps deliver water to the project while you’re using it and the core ejection slide helps remove the plug so you can make holes faster. It has a welded diamond tip, which helps increase durability.

    The downside to the DeWalt bit is that it tends to move along the surface slightly when getting started, making it harder to make accurate holes. We also found that it gets dull after just a few cuts.

    Pros
    • Diamond-welded tip
    • Reverse spiral thread
    Cons
    • Wears out quickly
    • Not for precision

    8. SHDIATOOL Diamond Core Drill Bits

    SHDIATOOL Diamond Core Drill Bits

    Size: ¼ inch
    Number of pieces: 2

    SHDIATOOL Diamond Core Drill Bits are attractive and effective. You get a two-pack, so you can work longer, and the vacuum-brazed diamond surface cuts through tile quickly and the wax center helps reduce temperatures while you work. Despite the hollow core, the bit remains stable and won’t bend while using it.

    The downside to this brand is that there are no grooves to help remove material, and the diamond surface wears off after just a few cuts.

    Pros
    • Vacuum-brazed diamond surface
    • Fast drilling
    • Cooling wax
    Cons
    • Wears out quickly

    tool divider

    Buyer’s Guide: Picking the Best Drill Bit for Porcelain Tile

    Consider Your Project

    Before you purchase drill bits for porcelain tile, we recommend taking the time to consider how much work you will need to do with them. If you only need to make one or two holes, you won’t need a large set. However, if many areas in your home have porcelain tile, you may be better off with several bits to make a range of hole sizes.

    Tip Material

    In almost every case, a diamond tip is what you’ll need to cut through porcelain tile effectively. Diamond is extremely hard and can get through the tile and produce a smooth cut. It also tends to last longer than other drilling materials. However, if you are on a tight budget and only need one or two holes, a tungsten carbide bit can help you get the job done.

    How to Make Better Holes in Porcelain Tile

    Tips:
    • Start by drilling at an angle to get the hole started, then hold the drill straight to make a clean cut through the tile.
    • Always use water as lubrication when cutting tile. The more water you use, the cooler the bit will stay.
    • Using less pressure and more water will help increase the bit’s lifespan.
    • soft corals and fish.

    tool divider

    Conclusion

    When choosing a drill bit for porcelain tile, we highly recommend our pick as the best overall, as the BOSCH HDG14 1/4 In. Diamond Hole Saw is perfect for a small job. It’s a durable bit that will last for several cuts and has a quick-change adapter that helps speed up bit changes. Another great option is our pick as the best value. The QWORK 5 Pcs Set is ideal if you need to make several cuts but want to keep the cost down. Each bit in the five-piece set has a U-groove that helps remove material while keeping the bit cool.


    Featured Image Credit: Russ Ward, Unsplash

    Contents

    Related posts

    OUR categories

    Project ideas

    Hand & power tools

    woodworking

    Garden

    Automotive